Summary
Finish: Original w/ touch-ups around tuning pegs on the headstock.
Body Material: Composite Body
Body Details: Composite wood semi-hollow body.
Neck Material: Maple Neck
Fingerboard Material: Rosewood Fingerboard
Neck Profile: Medium C-Shape.
Neck Thickness (IN): 1st fret: .79″ / 12th: .86″
Fingerboard Radius: 15.00
Nut Width: 1-3/4 in
Neck Details: One-piece bolt-on maple neck with a rosewood board, center dot inlays, and no adjustable truss rod.
— The tuning machines holes appear to have been filled and touched up at some point to accommodate an alternate installation.
Electronics: One single-coil “lipstick” pickup with a 3-way toggle tone select switch, tone control, and volume control.
— Electronics are original dating to 1964.
— This instrument was not grounded from the factory. A ground wire has been installed.
Pickup Measurements: 3.6 kΩ
Hardware: The trem bar is non-original.
Weight: 6 lbs 9.4 oz
Modifications / Repairs: A ground wire has been installed.
— Replacement trem bar.
— Touchups and filled holes on the back of the headstock around tuning machines and tuning pegs.
Case Details: Gig-bag.
Cosmetic Condition: This fine Dano shows lots of nice aging and playwear. Nicks and dings can be seen throughout. The back of the neck shows lots of nice and minor nicks and handwear. How nice!
Tech Notes: Currently setup with 10 gauge strings and low action. The frets are wide and low showing light to medium-light playwear.